Global Magnetic Particle Market Insights, Forecast to 2025

Ferrites
Commonly known as Ceramics, have been in production since the 1950's.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.

Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.

Alnico
These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.

AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.

Samarium Cobalt
They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.

SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.

Neodymium(NdFeB)
Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide.

Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.

Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.
Ferrites
Commonly known as Ceramics, have been in production since the 1950's.They are primarily made from Iron Oxide (FeO) and the addition of Sr and Ba through a calcining process. They are the least expensive and most common of all magnet materials. Primary grades are C1, C5 and C8. They are mostly used in motors and sensors.

Magnetic ferrite powder are suitable for producing different grades of hard ferrite magnets by wet pressing or dry pressing production process. According to the needs of clients, we could supply the magnetic ferrite powders in different granularity, The magnetic ferrite powder can be classified as isotropic magnetic ferrite powder and anisotropic magnetic ferrite powder.

Alnico
These are one of the oldest commercially available magnets and have been developed from earlier versions of magnetic steels. Primary composition is Al, Ni and Co, hence the name. Although they have a high remanent induction, they have relatively low magnetic values because of their easy of demagnetization. However, they are resistant to heat and have good mechanical features. Common applications are in measuring instruments and high temperature processes such as holding devices in heat treat furnaces.

AlNiCo magnetic powder is made of AlNiCo magnet and through cracked it into required particle size. The character is temperature coefficient of Br is small. The powder mainly used in raw material of bonded magnet, plastic magnet; all kinds of SmCo fault detection; magnetic printing and other highly temperature sensitivity fields.

Samarium Cobalt
They belong to the rare earth family because of the Sm and Co elements in their composition. Magnetic properties are high and they have very good temperature characteristics. They are also more expensive than the other magnet materials. They come mostly in two grades: SmCo5 and Sm2Co17,also known as SmCo 1:5 and 2:17. Common uses are in aerospace, military and medical industries.

SmCo Powder Samarium Cobalt powder SmCo magnetic powder Rare Earth Magnet powder use for producing Polymer bonded SmCo magnets by compressing moulding.

Neodymium(NdFeB)
Also known as Neo, these are the strongest and most controversial magnets. They are in the rare earth family because of the Nd, B, Dy, Gaelements in their composition. A relatively new group of commercial magnets, they are controversial because they are the only magnets that have been patented for both composition and processing. The patent and licensing issues are important and will be discussed later in this guide.

Neodymium magnet powder can be used to the automobile industry, office automation, automotive. DC brush-type motors. multi-pole stepper and spindle motor applications. Magnetic paints, magnetic printable substrates, magnetic films, medical diagnostics and therapeutics, video tape, copy toners, fingerprinting, sensors, fuel injectors, permanent magnets, nano level fluid sealing, electric toys and magnetic curing products, etc.

Since Ferrites Magnetic Particle and Neodymium(NdFeB) Magnetic Particle are the most commonly used magnetic raw materials, this report mainly focuses on these two products.

Demand is driven by demographics and the health of the economy. The profitability of individual companies depends on their ability to bid accurately, secure contracts, and control costs. Large companies enjoy economies of scale in financing and the ability to offer a broad range of services in many locations. Smaller companies can compete effectively by specializing in particular services or focusing on a certain geography.
China domestic Magnetic Particle industry developed fast, which accounts for almost 89% of total NdFeB Magnetic Particle production and 82% of Ferrites Magnetic Particle production. Though Chinese companies have low price advantage, the quality of domestic products is relatively poor.
Global Magnetic Particle market size will increase to 1730 Million US$ by 2025, from 1370 Million US$ in 2018, at a CAGR of 3.0% during the forecast period. In this study, 2018 has been considered as the base year and 2019 to 2025 as the forecast period to estimate the market size for Magnetic Particle.

This report researches the worldwide Magnetic Particle market size (value, capacity, production and consumption) in key regions like United States, Europe, Asia Pacific (China, Japan) and other regions.
This study categorizes the global Magnetic Particle breakdown data by manufacturers, region, type and application, also analyzes the market status, market share, growth rate, future trends, market drivers, opportunities and challenges, risks and entry barriers, sales channels, distributors and Porter's Five Forces Analysis.

The following manufacturers are covered in this report:
MQI
Aichi Steel
Zhao Ri Ke
Galaxy Magnets
Yuhong
Huiling
Western Magnet
San Huan
Hoosier Magnetics
Todakogyo
HIMAG
DMEGC Magnetics
Zhejiang Ante
Maanshan CY
BGRIMM Magnetic
Shunde Baling
MGC
Comc Technology

Magnetic Particle Breakdown Data by Type
Ferrites
Neodymium(NdFeB)
Magnetic Particle Breakdown Data by Application
Auto Industry
Household Appliance Industry
Computer Industry
Electronic Toys
Electroacoustic Product
Military Application

Magnetic Particle Production Breakdown Data by Region
United States
Europe
China
Japan
Other Regions

Magnetic Particle Consumption Breakdown Data by Region
North America
United States
Canada
Mexico
Asia-Pacific
China
India
Japan
South Korea
Australia
Indonesia
Malaysia
Philippines
Thailand
Vietnam
Europe
Germany
France
UK
Italy
Russia
Rest of Europe
Central & South America
Brazil
Rest of South America
Middle East & Africa
GCC Countries
Turkey
Egypt
South Africa
Rest of Middle East & Africa

The study objectives are:
To analyze and research the global Magnetic Particle capacity, production, value, consumption, status and forecast;
To focus on the key Magnetic Particle manufacturers and study the capacity, production, value, market share and development plans in next few years.
To focuses on the global key manufacturers, to define, describe and analyze the market competition landscape, SWOT analysis.
To define, describe and forecast the market by type, application and region.
To analyze the global and key regions market potential and advantage, opportunity and challenge, restraints and risks.
To identify significant trends and factors driving or inhibiting the market growth.
To analyze the opportunities in the market for stakeholders by identifying the high growth segments.
To strategically analyze each submarket with respect to individual growth trend and their contribution to the market.
To analyze competitive developments such as expansions, agreements, new product launches, and acquisitions in the market.
To strategically profile the key players and comprehensively analyze their growth strategies.

In this study, the years considered to estimate the market size of Magnetic Particle :
History Year: 2014-2018
Base Year: 2018
Estimated Year: 2019
Forecast Year 2019 to 2025
For the data information by region, company, type and application, 2018 is considered as the base year. Whenever data information was unavailable for the base year, the prior year has been considered.